Automation Components A/SCSX2 Current Switch (Normally Closed)
The Automation Components A/SCSX2 Current Switch (Normally Closed) has a solid-state output with a fixed trip point (set point). This switches are ideal for providing status information on any type of AC current using equipment. The Automation Components A/SCSX should be used in applications requiring a “Go/No Go” current switch. A change in the operating current may indicate mechanical failure or that the unit has been turned off. Units also include a red “Status” LED that will indicate whether the current is above or below the fixed trip point. A normally open version is also available. Every device on this cut sheet features a patented Din-Rail mounting system (Pat. no. US 7,416,421) for ease of installation. The AUtomation Components A/SCSX2 Series are covered by ACI’s Five (5) Year Limited Warranty. ACI fixed current status switches are designed for HVAC, Building Automation, or industrial systems. Typical applications include: go/no go, direct drive fans, pumps, heating elements, critical motors, and lighting circuits.
- Patented 35mm Din-rail mounting flange
- LED Indication
- Sensor power induced from monitored conductor
- .75 inch opening
- 0-250 Amp range
- 15 Amp Trip Point
NOTE: LEDs should not be used to indicate whether power or current is being applied to or running through the
aperture of the sensor. Current Switches are not to be used in Life & Safety applications, or in hazardous locations.
|Dimensions||3 × 3 × 3 in|