Automation Components A/SCS2 Current Switch (Normally Open)
The Automation Components A/SCS2 Current Switch has a solid-state output with a fixed trip point (set point). This switch is ideal for providing status information on any type of AC current using equipment. The A/SCS should be used in applications requiring a “Go/No Go” current switch. A change in the operating current may indicate mechanical failure or that the unit has been turned off. Units also include a red “Status” LED that will indicate whether the current is above or below the fixed trip point. A normally closed version (X) is also available. Every device on this cut sheet features a patented Din-Rail mounting system (Pat. no. US 7,416,421) for ease of installation. The Automation Components A/SCS2 is covered by ACI’s Five (5) Year Limited Warranty. ACI fixed current status switches are designed for HVAC, Building Automation, or industrial systems. Typical applications include: go/no go, direct drive fans, pumps, heating elements, critical motors, and lighting circuits.
- Sensor power is induced from the monitored conductor
- .75 inch opening
- LED indication
- Rated up to 200 amps
- 1.5 Amp trip point
- Normally open
- Patented 35mm Din-rail mounting flange
NOTE: LEDs should not be used to indicate whether power or current is being applied to or running through the
aperture of the sensor. Current Switches are not to be used in Life & Safety applications, or in hazardous locations.
|Dimensions||3 × 3 × 3 in|