Automation Components A/CSX2 Current Switch (Normally Closed)
The Automation Components A/CSX2 current switch is a solid-core with Normally-Closed (N/C) output configurations. All of these sensors will have a solid-state output with a fixed trip point (setpoint). These current switches are ideal for providing status information on any type of AC current using equipment. The A/CSX2 current switches are accurate, reliable, easy to install, and require less servicing than differential pressure switches, flow switches, and paddle wheels. The Automation Components A/CSX2 current switches should be used in applications in which a “Go/No Go” current switch is required. A change in the operating current may indicate mechanical failure or that the unit has been turned off. The Automation Components A/CSX2 series current switches can be used to monitor devices with a maximum continuous operating current of up to 250 Amps. These current switches will not need to be externally powered, since the power for the switch is induced from the conductor being monitored. Another great feature of the A/CS and A/CSX series current switches is that they include a Red “Status” LED that will indicate whether the current is above or below the fixed trip point. The A/CS switches have a 15 Amp trip point.
- LED indication
- Solid core
- Normally closed
- 0.75″ opening
- Rated up to 250 Amps
- Patented 35mm DIN rail mounting flange
NOTE: LEDs should not be used to indicate whether power or current is being applied to or running through the aperture of the sensor. Current Switches are not to be used in Life & Safety applications, or in hazardous locations.
|Dimensions||3 × 3 × 3 in|